How To Tie Stretch Cord To A Clasp
How To Tie Stretch Cord To A Clasp. With clasps for cord and leather you can create professional finishing touches for your jewelry designs. Stretch your cord before stringing any beads.
(las vegas, nv) i am making a bracelet which is double stranded so uses 2 pieces of the cord. Always test to make sure the last few beads (or links) near the t part of the clasp (the bar) are small enough that you can easily pull the bar through the loop, to close the clasp. Come up and go through your little loop.
Repeat On The Other Side.
First, pull the two cord ends. Gently pull the knot tightly to. Cut a piece of cord the size of your bracelet, plus leave yourself at least three inches of elastic on each side to tie your knots.
Come Up And Go Through Your Little Loop.
To tie an overhand knot, make a loop with the tail end of your cord. Lobster clasps can be used on necklaces, bracelets, and anklets. Pull the knot up tightly:
This Roll Contains 25 Meters Of.8Mm Diameter Stretchy Beading Cord.
Be sure to leave a little excess tiger tail that can be thread back into the first few Then pull the two beaded ends. (las vegas, nv) i am making a bracelet which is double stranded so uses 2 pieces of the cord.
Tie Your Knot With Some Tension In The Bracelet.
The stretch cord is used in a single strand but the stitch. They are often chosen as a preferred clasp due to their ease of opening an closing. These clasps feature wide openings that are perfect for thicker stringing materials like leather cord and even braided kumihimo designs.
Next, String On One Half Of A Clasp Set.
To use crimps, you will need some flat nose pliers to squash the crimps, or speciality crimping pliers that “fold” the bead into a small. The knot should now be tight. I always use doubled cord when doing straight stringing, which limits me to the larger hole beads.
Post a Comment for "How To Tie Stretch Cord To A Clasp"