Skip to content Skip to sidebar Skip to footer

How To Tie A Double Uni Knot

How To Tie A Double Uni Knot. Always remember to lubricate the knot with saliva or water before. Up to 6% cash back as the name implies, you tie two uni knots and draw them together.

Double Uni Knot Learn To Tie Fishing Knots Braid To Mono
Double Uni Knot Learn To Tie Fishing Knots Braid To Mono from snapperfishingtackle.com

Overlap the ends of the two lines to be joined. Make 6 turns with the tag end around the double line and through the loop. First, overlap the ends of the fluorocarbon and braided line by about 6 inches.

Here Is The Link And Thank You For Watching.


Then feed the tag end of the line through the loop and pull it tight around the standing part. Easy step by step instructions for tying a double uni or duncan knot in this knot. I found a video on how to do it.

Always Remember To Lubricate The Knot With Saliva Or Water Before.


Double double uni knot tying instructions. The double uni knot will cope with lines of differing diameters, and will also handle both braided and monofilament lines. It is based on the same system as a normal single uni knot.

• Lay The Doubled Line Next To The End Of The Leader.


This shows how to tie a double uni knot. Make sure that the lines are similar in diameter. Repeat with the end of the line on the left making the same number of wraps unless tying with braided line in.

Overlap The Ends Of The Two Lines To Be Joined.


How to tie a fishing knot: Use a minimum of three turns with monofilament, but double this for braided lines. Hold cinched knot with your right hand, and then form a loop with the braid similar to step 3 above.

Wrap Braid Tag Around The Doubled Line At The Top Of The Loop (10 X For Braid Or 5 X For Mono/Fluoro) 8.


Secure the knots tightly and trim your tag ends. First, overlap the ends of the fluorocarbon and braided line by about 6 inches. Moisten lines and pull tag end to snug up the turns.

Post a Comment for "How To Tie A Double Uni Knot"